MATERIAL SAFETY DATA SHEET
1、Product and Company Identification
Product name： Polybutylene terephthalate compound Synonyms： PBT COMPOUND
Chemical Formula： [-CO-C6H4-COO-(CH2)4-O-]nProduct Codes： 4000 SERIES
Supplier Information：Chang Chun Plastic Co.,Ltd
301 Songkiang Road, 7th FL., Taipei, Taiwan, 10477Emergency phone numbers：TEL:886-2-25038131,886-2-250018002、Composition / Information on Ingredients
Ingredient Polybutylene terephthalate resin Antimony CompoundFlame RetardantGlass FiberOther additives
3、 Hazards Identification
CAS Number
Percent (by weight) 19~88 2~65~205~450.02~10
26062-94-2 1309--4
628-70-1/71342-77-365997-17-3NA
Emergency Overview： Hazard warning not required
Adverse Human Health Effects： Vapour and fumes released at elevated temperature may be irritant for the eyes,the nose,the throat and respiratory tract and in case of overexposure may causenausea and headache.
Environmental Effects： No Information availablePhysical and Chemical Hazards： No Information availableSpecific Hazards： No Information available4、First-Aid Measures
Inhalation： When fumes of molten material have been inhaled: - Move person to fresh air as quickly as possible - Rest in half upright position - Loosen clothing - Keep warm
Ingestion： No danger of toxicity,this material is biologically inactive
Skin Contact： If molted material contacts skin , cool rapidly with cool water,and seek medical attention.
Attention : never pull off the molten material from the wound.
Eye Contact： Flush with water, and seek medical attention if it is necessary.Protection of First-aiders： No Information available
Notes to Physician： If melted material contacts, cool rapidly with cool water,and seek medical attention. 5、 Fire-Fighting Measures
Extinguishing Media： Water,foam,carbon dioxide, dry chemicalFire and Explosion Hazards： NA
Special Firefighting Procedures： Treat as a\"class A\" file and avoid to respire dust.Special Equipment for the Protection of Firefighters： Wear personal protective equipment6、Accidental Release Measures
Personal Precautions： Wear personal protective equipment
Environmental Precautions： This material presents no danger regarding toxicological and ecological consideration.
Methods for Cleaning Up： Sweep up and place in disposal container, it could be recycle used.7、Handling and Storage
Handling： Make provisions for sufficient ventilation and local exhaust at vent,nozzle .
Dust and processing fumes must be removed by effective exhaust ventilation. Storage： Store in clean and dry cool condition. 8、Exposure Controls / Personal ProtectionEngineering Measure： NA
Control parameters： OSHA PET(nuisance/iner dust):15mg/M3(total),5mg/M3(respirable) ACGIH TLV(nuisance/iner dust):10mg/M3(total),5mg/M3(respirable)․Limit values： NA
․Biological Standards： NA
Personal Protective Equipment： hemlet, mask,safety shower, eye wash fountain ․Respiratory Protection： dust mast
․Hand Protection： wear protective gloves. ․Eye Protection： wear safety goggle
․Skin and Body Protection： wear protective gloves and clean body-covering clothing.
Specific Hygiene Measures： Adequate washing facilities with supplies of mild soap and hand cleaner
should be available at all working locations. Solvents should never be used as hand cleaners. Smoking,eating and drinking in working and storage area should be prohibited.9、Physical and Chemical PropertiesPhysical State： solidColor： -pH： ND
Decomposition Temperature： >300℃Auto Ignition Temperature： >420℃Vapor pressure： NDDensity： 1.2～1.810、Stability and Reactivity
Stability： Stable under ordinary conditions of use and storage
Possible Hazardous Reactions Occurring under Specific Conditions： Don't heat to 300℃ Conditions to Avoid： No information available Materials to Avoid： strong bases Hazardous Decomposition Products： No information available 11、Toxicological Information
Acute toxicity： No information available Local effects： No information available Sensitization： No information available
Chronic Toxicity or Long Term Toxicity： No information available Specific effects： No information available12、Ecological Information
Possible Environmental Effects, Behavior and Fate： Leakage will cause environment polution13、Disposal Considerations
Recommended Methods for Safe and Environmentally Preferred Disposal： Could be recycle used14、Transport Information
Form： PelletOdor： odorless
Boiling Point/Boiling Range： NDFlash Point & Method Used： >355℃ Explosion Properties： NDVapor density： NDSolubility： ND
International regulations： NoneUN classification number： NA
Specific Precautionary Transport Measures and Conditions： No hazardous transporation product. Keep away from moisture. 15、Regulatory InformationApplicable Regulations： None16、Other InformationNFPA Ratings：
Company:CHANG CHUN PLASTICS CO.,LTD.(Kaohsiung factory) Address: No. 14, Kung Yeh 1 Road, Jen-Wu Industrial District, Kaohsiung Taiwan. Person in charge:Fu-Ly Wu Tel: 886-7-3711301 ext 334Label Hazard Warning：---Literature References：Rev. Date: May.02, 2006